Steel & Reclaimed Scaffold Board Industrial Look Shoe Rack Bench

Product Information

Once again a Project from a pile of scrap wood, always very gratifying and it does exactly what we want it to do, we can put shoes underneath, and also on the 2 tiers, Just the job, and built in one day as scheduled. Let the product sit on the wood for the specified amount of time, as per the instructions on the can.

Scaffolding boards can also be used for other applications such as furniture or general timber projects.

So if you’re interested in finding out how it’s all built and how much it cost, then here’s all in the info you need. Step 1 – Prepare the Area My plan is to use the scaffold boards as the 2 end uprights and also cut the remainder into 4no 30mm strips/bearers and then cut the pallet wood into all the same lengths to span horizontally across the bearers.

I cut the lengths of scaffold board I needed for the 2 End Pieces, then using another scaffold board I measured these to the size I wanted minus the 2 end piece dimensions which was about 34mm, My dimension was 130cm, In my haste to get this project finished I didn't get much chance to take as many photos of the processes as I would have like but to be honest there wasn't a lot to it really, and there was no wood glue used either but it's as tough as old boots:)(Excuse the pun) Our Scaffolding Planks are produced using European Whitewood. They are Graded, End Banded and the finest quality in Europe. These scaffolding boards must be supported every 1.2m when used on a scaffold or builder's trestle.

Site Customisation

Cloths allow for an easy application – no need to brush or soak, simply wipe off. Unlike brushes however, cloths don’t offer as much coverage – and often require more than one application. Be sure to add an extra coat if necessary.