Horstmann H27XL Programmer, Multi

Product Information

The programmer is fitted with a non-rechargeable, long life battery, which will maintain the programmed time settings for a minimum of ten months with the supply disconnected. By pulling outward and generally downward I can clearly see the single wall box because I am dragging that towards me too. It is not separating from the main unit or the stand-off.

The Secure Meters Horstmann CHANNELPLUS H27XL is a white 2 channel 7 day electronic digital programmer with independent timing of heating and hot water.. User friendly, it is designed for domestic use, providing advanced, easily programmed features. I also don't really understand how each of the two-way valves operate - whether the timer "job shares" between the two zones and whether two NEST thermostats can replace that functionality. Or if each thermostat demands heat and the timer is on for each zone, both valves just open and they get served with hot water equally.During power interruptions the display will be blank, after 3 days the current time of day will be lost. If the programmer is not to be used for a long period of time, the switch on the rear of the unit should be returned to the BATTERY OFF position. These are both to prolong the battery life. SERVICE AND REPAIR

For instance, I *hope* the cabling to each thermostat allows for me to install the NEST power supply (supplies?) in the hot tank cupboard (where the timer currently lives) and power each thermostat (remotely) that way. What I really want to do is to install a NEST in place of the two thermostats, and a single timer for the water but I don't yet understand what wiring my system employs and how I might convert that for NEST. More manuals of Thermostats Frequently Asked Questions about Horstmann ChannelPlus H27XL ThermostatWhilst the HOLIDAY FUNCTION is in operation the system will remain OFF, the display will show the number of nights remaining. The HOLIDAY setting is an instant function and cannot be set in advance. The HOLIDAY FUNCTION can be cancelled at any time by pressing any of the SELECT buttons. Normal programme functions will resume at the first ON period after the pre-set number of nights has expired. INFORMATION AND ADVICE Programming ON/OFF times The installer will have set the programmer to suit the installed system. If this is a Fully pumped system this will allow independent control of the Central heating and Hot water, however on a Gravity system the Central heating and Hot water are linked so that it is not possible to use the Central heating independently. This will allow only one common time setting for both Hot Water and Central Heating. BATTERY Your programmer will prevent you from accidentally overlapping ON and OFF times. Example: If the 2nd ON time is set at 12:00pm and then you try and set the 1st OFF at 12:30 pm the OFF setting will 'bounce' by a 10 minute period until the 2nd ON time has been adjusted. FULLY PUMPED OR GRAVITY SYSTEM

Using the RESET procedure may rectify the fault. If the problem persists the programmer will need replacing. A piece of plastic which may act as some sort of stand-off or interface - it's the piece that has the 2 screws in the top (not any more though). I suspect this is integral to the main unit - I only mention it because it is a separate moulding

The thermostat is crafted using high-quality materials, ensuring its reliability and durability over time. It is designed to withstand everyday wear and tear, providing long-lasting performance. The thermostat is compatible with a wide range of heating systems, including gas, electric, and oil boilers. It offers basic functionalities such as temperature control, allowing users to set their desired room temperature and adjust it as needed.