RODE NTG2 SHORT SHOTGUN MICROPHONE

Product Information

Institute BV Amsterdam, SAE. "Microphones". Practical Creative Media Education . Retrieved March 7, 2014. The Azden SMX-30V attaches to your camera with a standard cold shoe or via a 1/4-20 thread. In addition, the microphone will run for up to 100 hours on a pair of AA batteries and has an auto power on/off option to conserve battery life. The audio output cable is detachable, which means you can simply replace it if it breaks rather than needing to send it out for repairs. Rayburn, Ray A. (November 12, 2012). Eargle's The Microphone Book: From Mono to Stereo to Surround – A Guide to Microphone Design and Application. Taylor & Francis. ISBN 9781136118135. How do shotgun mics achieve such a tight polar pattern compared with other designs? And how come they seem to be getting shorter every year? Bartlett, Bruce. "How a Cardioid Microphone Works". Archived from the original on December 12, 2016 . Retrieved February 12, 2015.

The frequency response of a microphone is important because it affects the sound of the recording. A microphone with a flat frequency response reproduce all frequencies equally well. This produces a natural sound. In contrast, a microphone with a shaped frequency response will boost or attenuate certain frequencies. This can be better for specific situations. With every reputable—and less than reputable—microphone manufacturer producing them, it’s sometimes hard to figure out which shotgun mics deliver on their promise of great sound. So to help you out, we’ve rounded up a list of tips, advice, and the best shotgun mics. Nahin, Paul J. (2002). Oliver Heaviside: The Life, Work, and Times of an Electrical Genius of the Victorian Age. JHU Press. p.67. ISBN 9780801869099. Harry F. Olson and Les Anderson, RCA Model 44 Ribbon Microphone". Mix Magazine. September 1, 2006. Archived from the original on March 24, 2008 . Retrieved April 10, 2013. USB allows direct connection to PCs. Electronics in these microphones powered over the USB connection performs preamplification and ADC before the digital audio data is transferred via the USB interface.RF condenser microphones use a comparatively low RF voltage, generated by a low-noise oscillator. The signal from the oscillator may either be amplitude modulated by the capacitance changes produced by the sound waves moving the capsule diaphragm, or the capsule may be part of a resonant circuit that modulates the frequency of the oscillator signal. Demodulation yields a low-noise audio frequency signal with a very low source impedance. The absence of a high bias voltage permits the use of a diaphragm with looser tension, which may be used to achieve wider frequency response due to higher compliance. The RF biasing process results in a lower electrical impedance capsule, a useful by-product of which is that RF condenser microphones can be operated in damp weather conditions that could create problems in DC-biased microphones with contaminated insulating surfaces. The Sennheiser "MKH" series of microphones use the RF biasing technique. A covert, remotely energised application of the same physical principle was devised by Soviet Russian inventor Leon Theremin and used to bug the US Ambassador's Residence in Moscow between 1945 and 1952. Shotgun mics are long, narrow tubes with slits evenly spaced along each side and a capsule near the rear end. Also called interference tube microphones, these mics are designed to allow sound from in front of the microphone to pass through the tube to the capsule. At the same time, sounds from the sides must enter through the slits. This creates a phase cancellation effect that results in the rejection of those off-axis sounds. Fiber-optic microphones are robust, resistant to environmental changes in heat and moisture, and can be produced for any directionality or impedance matching. The distance between the microphone's light source and its photodetector may be up to several kilometers without need for any preamplifier or another electrical device, making fiber-optic microphones suitable for industrial and surveillance acoustic monitoring.

Fiber-optic microphones do not react to or influence any electrical, magnetic, electrostatic or radioactive fields (this is called EMI/RFI immunity). The fiber-optic microphone design is therefore ideal for use in areas where conventional microphones are ineffective or dangerous, such as inside industrial turbines or in magnetic resonance imaging (MRI) equipment environments. The NTG5 has a 20 Hz to 20 kHz frequency response and very low self-noise of just 10dBA. It also features a revolutionary acoustic design that uses circular acoustic perforations instead of the linear slots that most shotgun microphone designs have. The NTG5’s super-cardioid polar pattern makes it highly directional with a smooth off-axis response. It’s another microphone with a 3-pin XLR connection which needs phantom power. This shotgun microphone was built well with a durable housing for rugged dependability but is lightweight enough to ensure comfort. Nnonyelu, Chibuzo; Wong, Kainam; Wu, Yue (January 2019). "Cardioid microphones/hydrophones in a collocated and orthogonal triad—A steerable beamformer with no beam-pointing error". The Journal of the Acoustical Society of America. 145 (1): 575–588. Bibcode: 2019ASAJ..145..575N. doi: 10.1121/1.5087697. PMID 30710946. S2CID 73422758 . Retrieved February 1, 2021.To get the best sound quality using your shotgun microphone, you need to understand the basics of how it works. What is a shotgun microphone? Despite lavaliers being suitable for a ton of things, the form factor of a shotgun mic make them more versatile. When compared to lavaliers, shotgun microphones can sound more natural. Also, they can be kept out of your shots without needing to be hidden on actors, yourself, or interviewees. Photo from Unsplash How Far Can Shotgun Mics Reach?

Additionally, its frequency response includes a mild rise in the treble to aid with speech clarity. The MKE 600 features a lightweight and durable metal housing that provides reliable toughness without adding too much weight to your rig. Put together, the mic and boom arm are a match made in heaven. The boom arm has three points of motion for varying levels of access, and the mic screws in easily to provide quality sound. Both the mic and boom arm are sturdy. Plug the USB-C cable into your computer, and you're good to go.Since all wind noise is generated at the first surface the air hits, the greater the spacing between the shield periphery and microphone capsule, the greater the noise attenuation. For an approximately spherical shield, attenuation increases by (approximately) the cube of that distance. Thus larger shields are always much more efficient than smaller ones. [ citation needed] With full basket windshields there is an additional pressure chamber effect, first explained by Joerg Wuttke, [65] which, for two-port (pressure gradient) microphones, allows the shield/microphone combination to act as a high-pass acoustic filter. The clipping level is an important indicator of maximum usable level, as the 1% total harmonic distortion (THD) figure usually quoted under max SPL is really a very mild level of distortion, quite inaudible especially on brief high peaks. Clipping is much more audible. For some microphones, the clipping level may be much higher than the max SPL. [ citation needed] We’ve tested music mics, shotgun mics to attach to a video camera and plenty of easy-to-use USB mics, so you can be sure that every model listed below will be right for your application. If you just need a plug-and-play microphone for video chats and working from home, we’d recommend a simple USB microphone— but being simple doesn’t need to mean features have been sacrificed for easy desktop setup. Often, they’ll offer extra functionality that makes these easy-to-use models ideal for recording podcasts or streaming. The Audio-Technica AT897 is a mic of many uses. It is equally adept at film/TV/video productions, professional recording, wildlife recording, and broadcast applications.

Shotgun mics and lavaliers (also known as lapel mics) can both capture quality audio when used properly. Both are great for dialogue, vlogging and interviews. Lavalier mics are generally clipped onto the subject, so even the omnidirectional variety can offer a good signal-to-noise ratio due to their proximity to the sound source.

Sessler, G.M.; West, J.E. (1962). "Self-Biased Condenser Microphone with High Capacitance". Journal of the Acoustical Society of America. 34 (11): 1787–1788. Bibcode: 1962ASAJ...34.1787S. doi: 10.1121/1.1909130. Brown type G telephone relay owned by Edwin Howard Armstrong". National Museum of American History . Retrieved June 15, 2022. As we have discussed, shotgun mics focus closely on the subject directly in front of them, and they reject sounds from the sides and the rear. That’s why it’s key to get the microphone as close to your subject as possible and to keep it pointed directly at your sound source. To take a scientific measurement with a microphone, its precise sensitivity must be known (in volts per pascal). Since this may change over the lifetime of the device, it is necessary to regularly calibrate measurement microphones. This service is offered by some microphone manufacturers and by independent certified testing labs. All microphone calibration is ultimately traceable to primary standards at a national measurement institute such as NPL in the UK, PTB in Germany and NIST in the United States, which most commonly calibrate using the reciprocity primary standard. Measurement microphones calibrated using this method can then be used to calibrate other microphones using comparison calibration techniques.